Flexible single bottle hose with excess flow POL. 350-PSI CGA approved 1/4" MPT x POL.

Soft nose handwheel POL x male 1" 20 thread swivel.

Flexible single bottle hose with excess flow POL. 350-PSI CGA approved 1/4" MPT x POL.

3/8" Female Swivel x 3/8" Swivel SAe

3/8" Female Swivel x 3/8" Male

3/8" Female Swivel x 3/8" Swivel SAe

Flexible single bottle hose with excess flow POL. 350-PSI CGA approved 1/4" MPT x POL.

9/16"-18 L.H. female fitting on each end.

The MER14TCQD series Quick Disconnect hose will allow you to hook up to a Quick Connect valve on an appliance to a LP gas cylinder. For use with low pressure gas appliances (i.e. 14" water column). Includes 144" hose with shut off valve. Regulator not included

Flexible type 1-1/4" BBQ hose. 3/8" S.A.E. swivel x 1/4" nipple.

12' (1/4"Female Cylinder-Threaded 1-20 x Female Pipe Threaded Hose.

MEC Stainless Steel braided pigtails are for connecting propane cylinders to the propane regulator. The Stainless Steel braid provides added protection on to the hose along with the safety features of thermal protection in case of fire and excess flow protection in case of broken gas line. Female QCC, Type I connection x 1/4” inverted male flare.

1/4" ID Hose, 1/4" MNPT X Quick Disconnect Male Nipple. 72" Long.

3/8" ID X 1/2" F.SAE X 3/8" MPT. Fairview's Type 1 Rubber F.SAE X MPT Assemblies are CSA certified to 350 PSI WP. (-60°F/-51°C)

1/4" ID Premium Thermoplastic Hose. 1/4" MPT X QCC1.

3/8" MPT x 3/8" Female Flare

1/4" ID Premium Thermoplastic Hose. 1/4" Male Inverted Flare X QCC1.

1/4" Inverted Flare x POl

Soft nose handwheel POL x male 1" 20 thread swivel.

1/4" Inverted Flare x POl

3/8" Female Swivel x 3/8" Swivel SAe

3/8" Male Flare x 3/8" Male Pipe

1/4" Thermo Pigtail. FQCC x 1/4" MIF - 15"

1/2" Female Flare Swivel - 3/8" MNPT

MEC Stainless Steel braided pigtails are for connecting propane cylinders to the propane regulator. The Stainless Steel braid provides added protection on to the hose along with the safety features of thermal protection in case of fire and excess flow protection in case of broken gas line. Female QCC, Type I connection x 1/4” inverted male flare.

Flexible single bottle hose with excess flow POL. 350-PSI CGA approved 1/4" MPT x POL.

10' Hose / Male QD Nipple X Female QD W/ shutoff / Bushing - 1/4"FMPT X 1/8"FNPT. For use with Weber® Q portable grill models: 100, 120, 1000, 1200, 200, 220, 2000, 2200. Includes thread sealant and leak detector.

1/4" ID Hose, Male Soft Nose POL, Plastic Handwheel X 1"20 Swivel. 60" Long.

1/4" ID Premium Thermoplastic Hose. 1/4" MPT X QCC1.

1/2" Female Flare Swivel - 3/8" MNPT

1/4" ID Premium Thermoplastic Hose. 1/4" Male Inverted Flare X QCC1.

1/4" Inverted Flare x POl

1/4" Inverted Flare x POl

Soft nose handwheel POL x male 1" 20 thread swivel.

Soft nose handwheel POL x male 1" 20 thread swivel.

9/16"-18 L.H. female fitting on each end.

3/8" Male Flare x 3/8" Male Pipe

3/8" Female Swivel x 3/8" Swivel SAe

3/8" Male Flare x 3/8" Male Pipe

9/16"-18 L.H. female fitting on each end.

CSA certified. For quick connect and disconnect of LP-gas hose to camper / RV cooking stoves.

1/4" Inverted Flare x POl

1/2" Female Flare Swivel - 3/8" MNPT

10' Hose / Male QD Nipple X Female QD W/ shutoff / Bushing - 1/4"FNPT X 1/8"FNPT. For use with Coleman® Roadtrip® grill models: LX, LXX, and LXE. Includes thread sealant and leak detector.

3/8" Female Flare Swivel X 3/8" Female Flare Swivel. 48" Long

Standard fitting replacement hose and regulator for BQQ grills. 3/8" female flare fitting for attaching to your grill and Type 1/QCC adaptor for easy connection to the propane tank. Inlet: Black F. QCC I, Outlet: 3/8" F.F. Swivel, Hose Length: 24".

3/8" ID X 1/2" F.SAE X 3/8" MPT. Fairview's Type 1 Rubber F.SAE X MPT Assemblies are CSA certified to 350 PSI WP. (-60°F/-51°C)

3/8" Female Flare Swivel X Male Quick Disconnect. 9" Long.

High Flow female QCC, Type I connection -1/4” male inverted flare.

1/4" ID Premium Thermoplastic Hose. 1/4" Male Inverted Flare X QCC1.

QCC x male 1" - 20 thread swivel.

1/2" Female Flare Swivel - 3/8" MNPT

High Flow female QCC, Type I connection -1/4” male inverted flare.

1/4" ID Premium Thermoplastic Hose. 1/4" MPT X QCC1.

1/4" ID Premium Thermoplastic Hose. 1/4" Male Inverted Flare X QCC1.

1/4" ID Premium Thermoplastic Hose. 1/4" Male Inverted Flare X QCC1.

Flexible single bottle hose with excess flow POL. 350-PSI CGA approved 1/4" MPT x POL.

3/8" Female Swivel x 3/8" Male

QCC x male 1" - 20 thread swivel.

1/4" Inverted Flare x POl

3/8" Female Swivel x 3/8" Swivel SAe

1/4" Inverted Flare x POl

CSA certified. For quick connect and disconnect of LP-gas hose to camper / RV cooking stoves.

Research with hose purchasers overwhelmingly indicates a preference for hoses which offer light weight, easy handling, kink resistance and lasting performance. Thev zero-G advanced hose design takes these must-haves to a higher level than ever before. Up to 40% lighter weight than heavy duty vinyl hoses. Kink-free uninterrupted flow. Tough G-Force woven fiber jacket resist leaks, abrasion and punctures. Consistent, high flow equal to a conventional 5/8'' hose. 600+ psi burst rated. Flexible and easy to maneuver even in cold weather down to 35° F. Ergonomic, crush-proof couplings.

MEC Stainless Steel braided pigtails are for connecting propane cylinders to the propane regulator. The Stainless Steel braid provides added protection on to the hose along with the safety features of thermal protection in case of fire and excess flow protection in case of broken gas line. Female QCC, Type I connection x 1/4” inverted male flare.

1/2" Female Flare Swivel - 3/8" MNPT

Female QCC, Type I Connection - 1/4” MNPt

12' Hose / 3/8" Female Flare X Male QD / 3/8" Male Flare X 1/8" male pipe thread elbow adapter. For use with Coleman®Roadtrip® grill models: LX, LXX, and LXE. Includes thread sealant and leak detector.

3/8" ID Hose, 3/8" Female Flare Swivel X 3/8" MNPT. 48" Long.

12' Hose / Male QD Nipple X 3/8"FFS Fitting / 3/8"Male Flare X 1/4"FNPT / Bushing - 1/4"MPT x 1/8" FNPT. For use with Weber® Q portable grill models: 100, 120, 1000, 1200, 200, 220, 2000, 2200. Includes thread sealant and leak detector.

1/4" ID Premium Thermoplastic Hose. 1/4" MPT X QCC1.

1/4" ID Premium Thermoplastic Hose. 1/4" MPT X QCC1.

3/8" ID X 1/2" F.SAE X 3/8" MPT. Fairview's Type 1 Rubber F.SAE X MPT Assemblies are CSA certified to 350 PSI WP. (-60°F/-51°C)

1/4" Inverted Flare x POl

QCC x male 1" - 20 thread swivel.

3/8" Female Swivel x 3/8" Swivel SAe

9/16"-18 L.H. female fitting on each end.

3/8" MPT x 3/8" Female Flare

1"- 20 male swivel x 1" -20 female.

1/4" Inverted Flare x POl

1/4" Inverted Flare x POl

QCC x male 1" - 20 thread swivel.

1/4" ID Premium Thermoplastic Hose. 1/4" Male Inverted Flare X QCC1.

1/4" Inverted Flare x POl

1/4" Inverted Flare x POl

1/4" Inverted Flare x POl

Flexible single bottle hose with excess flow POL. 350-PSI CGA approved 1/4" MPT x POL.

Flexible single bottle hose with excess flow POL. 350-PSI CGA approved 1/4" MPT x POL.

1/4" Inverted Flare x POl

Flexible single bottle hose with excess flow POL. 350-PSI CGA approved 1/4" MPT x POL.

3/8" Female Swivel x 3/8" Swivel SAe

Flexible single bottle hose with excess flow POL. 350-PSI CGA approved 1/4" MPT x POL.

9/16"-18 L.H. female fitting on each end.

3/8" Female Swivel x 3/8" Swivel SAe

1/4" Thermo Pigtail. FQCC x 1/4" MIF - 15"

1/4" Thermo Pigtail. FQCC x 1/4" MNPT X 20"

Female QCC, Type I Connection - 1/4” MNPt

High Flow female QCC, Type I connection -1/4” male inverted flare.

If you converted your Weber Q using our ME36QP or Coleman Roadtrip using our ME66CP, The MEGR-153-36QDP will allow you to connect a 1 pound disposable bottle to your converted grill. Perfect for taking your RV converted grill tent camping, tailgating or just out on the back deck. Inlet: 1"-20 Male, Outlet: Female QD, Hose Lenght: 36"

1/4" ID Hose, 1/4" MNPT X Quick Disconnect 1/4" FNPT with cap. Includes shut-off valve. 144" Long.

1/4" ID Premium Thermoplastic Hose. 1/4" MPT X QCC1.

3/8" ID X 1/2" F.SAE X 3/8" MPT. Fairview's Type 1 Rubber F.SAE X MPT Assemblies are CSA certified to 350 PSI WP. (-60°F/-51°C)

3/8" ID X 1/2" F.SAE X 3/8" MPT. Fairview's Type 1 Rubber F.SAE X MPT Assemblies are CSA certified to 350 PSI WP. (-60°F/-51°C)

1/4" ID Premium Thermoplastic Hose. 1/4" Male Inverted Flare X QCC1.

3/8" ID Hose, 1/2" Female Flare Swivel X 3/8" MNPT. 48" Long.

1/4" ID Hose, Female Quick Disconnect X 1/4" Quick Disconnect Nipple. Includes shut-off valve. 72" Long.

1/4" ID Premium Thermoplastic Hose. 1/4" Male Inverted Flare X QCC1.